Martin Professional Maxxyz User Manual Download Page 132

Page: 132 / 160

132

Maxxyz

View

The two view keys, “Patch Numbers” and “Clear View” pertain exclusively

to fixtures. Either one of these views, but not both can be selected. They

determine whether a fixture number will be visible or not on the drawing.

When “Patch Numbers” is selected

(highlighted in red), the fixture icon will display

like this:

When “Clear View is highlighted, the fixture

icon will display like this:

Setup

When highlighted, this button “un-hides” the additional buttons to the

right.

NOTE:

When the Setup button is highlighted and the setup options

are visible, you can not select fixtures to load them into the programmer.

Edit Buttons

Fixture

When selected, this button allows you to

manipulate the fixtures in the drawing.

Truss

When selected, this button allows you to add,

delete and otherwise manipulate trusses in the

drawing.

Text

When selected, this button allows you to add and

edit text.

Note:
To ensure smooth operation, it is recommended that only one element

(fixture, truss, or text) be highlighted at any given time.

Add

This button opens either a pop-up window or dialog box to add either

truss or text. Adding fixtures is handled separately (see “Adding fixtures

to the 2D Layout” on page 135)

Change

The “Change”

button opens a new

window:

Color

Clicking on this button brings up a pull-down menu

with a choice of colors. The selected element will

be changed to the selected color.

Icon

Clicking on this button will bring up a list of

alternative views (i.e. side, top, front) for the

selected fixture to be shown in. Please note that

only fixtures can use this feature.

Patch

This feature is not yet implemented.

Number

The feature is not yet implemented.

Rotation

This button, when selected will bring up a window

with two icons. One is used to rotate elements in

increments of 22.5 degrees to the left, the other in

increments of 22.5 degrees to the right.

Lock

When selected, all elements on the page will be locked and will not be

able to be repositioned.

Back

This button will close this window.

Summary of Contents for Maxxyz

































































































































































Search results

Summary of Contents for Maxxyz

Reviews:

Related manuals for Maxxyz

Brands by name

Popular brands

Martin Professional Maxxyz, User Manual

Search results

Summary of Contents for Maxxyz

Reviews:

Related manuals for Maxxyz

Brands by name

Popular brands