Martin Professional Maxxyz, User Manual

Page: 47 / 160

Selecting Fixtures 47
D
ESELECTING
F
IXTURES
Once you have finished adjusting the desired attributes of the selected fixtures, you can deselect
those fixtures in a number of different ways. Note that deselected fixtures and their attribute
values (whether active or inactive) remain in the programmer until otherwise cleared.
• To deselect a specific fixture or fixtures, press the - (minus) key and enter the desired fixture or
group number(s).
• To deselect all fixtures, press the “Deselect All” softkey found in the “Fixtures” window or press 0
(zero) Enter.
• Entering a new fixture selection will deselect all previously selected fixtures.
• Selecting fixtures using the Selected Fixtures screen will deselect all previously selected fixtures.
C
LEARING
S
ELECTED
F
IXTURES
To completely clear the programmer of all fixtures, press the Clear button twice.
• The first time you press Clear, the “Clear Options” window will appear.
• The second time you press Clear, all fixtures will be cleared.
At that point, the programmer screen
5
will be emptied and the visualizer will return to its previous
state.
It is also possible to clear only selected attributes of specified fixtures. For more information,
please see “Clear and the Programmer” on page 81.
Null Channel A null channel is one that is not in the programmer. It may still have a
value, but, as it is not in the programmer, it is not considered either
active or inactive and is therefore “null.”
5. For more details, please see “The Programmer Window” on page 69.
Selected Fixture A selected fixture is one that is currently editable using the
programmer’s trackbelts, touch screen, etc.