Martin Professional Maxxyz, User Manual

Page: 75 / 160

The Programmer Window 75
C
LONE
O
PTIONS
C
ATEGORY
This category of options determines which attributes will be loaded when you clone one fixture to
another. For more information on cloning fixtures, please see “Using Load to Clone Fixtures” on
page 78.
E
XTRA
F
ILTERING
C
ATEGORY
This category of filter is used to determine what information is loaded based not on attribute type,
but on the
value type.
F
ILTER
C
ATEGORY
In many ways, this category is akin to the Preset page filters. Using these filters, you can
determine which attribute groups will be loaded into the programmer. By default, all of these
filters are “on.”.
Active Only (default) When “Active Only” is selected, only the active values of the source
fixture will be loaded to the target fixture(s). Inactive and null values
will be ignored.
Active and Inactive With “Active and Inactive” selected, all non-null (i.e. 0 to 100)
attribute values will be cloned from the source fixture to the target
fixture.
Whole Fixture With “Whole Fixture” highlighted, every attribute value (dependant on
the state of the other “Load Options” filters) will be cloned from the
source fixture to the target. Null values will be cloned as zeros.
Base Value (default
on)
These values encompass the traditional attributes: pan, tilt, color,
gobo, etc.
Effect Value (default
off)
These values are those that are associated specifically with effects:
pan swing, pan speed, pan mode, etc. For more information, please
refer to “Effects” on page 140.
Timing Value
(default off)
These values are those that are associated with the “Delay” and
“Fade” overrides used to control when and how long a particular
attribute will move. For more information, please see “Setting an
Individual Attribute Fade Time” on page 103 and “Setting an Attribute
Delay Time” on page 105.
Intensity Focus Only those attributes which would be found in the Dim/Focus attribute
group will be recorded when this is selected.
P/T Only those attributes which would be found in the Pan Tilt attribute group
will be recorded when this is selected.
Color Only those attributes which would be found in the Color attribute group
will be recorded when this is selected.
Gobo Only those attributes which would be found in the Gobo attribute group
will be recorded when this is selected.
Zoom/Prism Only those attributes which would be found in the Zoom/Prism attribute
group will be recorded when this is selected.
Effects Speed Only those attributes which would be found in the Effects/Speed attribute
group will be recorded when this is selected.
Framing Only those attributes which would be found in the Framing attribute group
will be recorded when this is selected.
Defilter Pressing this button will clear all selected filters from the Filter Category