Martin Professional Maxxyz, User Manual

Page: 20 / 160

20 Maxxyz
E
D I T I N G
D
I S P L A Y
S
C R E E N S
It is possible to customize the views shown on the Playback screens of the Maxxyz console to
suit your needs. Once a view is recorded, be aware that the view is recorded to the
console , not
the specific show. This means that any changes made to the views on one console will not be
transferred to a new console by loading a show. To record a new view:
1 Using the trackball, close all open windows in the target screen by clicking on the small “x” found
in the upper right hand corner of each of the windows.
1
2 Press the “Menu” hard key found near the top and center of the console.
3 From the pop up screen that appears, select the desired screen.
4 Using the trackball, position and resize the screen as desired.
5 Add any additional screens required
6 Press “Record” and the desired view screen hard key.
7 In the pop up window, enter the name of the new view and then press “ok.”
Note that temporary changes can be made to the screens by adding and/or resizing views
without recording them. When the appropriate view key is pressed again, the view will return to
the earlier saved view. Also please note that with the current software, windows selected from
the Menu list can only be added to the right hand touch screen and external monitors. While it is
possible to close and resize windows on the left hand touch screen and external monitors, it is
not currently possible to add windows from the Menu list.
Presets This view key will primarily display the preset selection view with a small
channels view on the touch screen and Martin Show Designer on the
external monitor
Groups/fixture This view key splits the touch screen between the group and fixture list
and places Martin Show Designer on the external monitor
Groups/presets This view key displays the preset selection and group selection views
on the touch screen and Martin Show Designer on the external monitor
1. Note: the one exception to this is the “channels” window. The channels window can not be closed.
Groups/3Dview This view key will display the channels view (used in manipulating
fixtures) and group selection on the touch screen and the Martin Show
Designer view on the external monitor.