Martin Professional Maxxyz, User Manual

Page: 64 / 160

64 Maxxyz
E
D I T I N G
G
R O U P S
Once a group has been recorded, it can be easily edited. Maxxyz provides two different ways of
editing an existing group. The first is to add or
merge fixtures into an existing group and the
second is to replace the fixtures in the existing group with the currently selected fixtures.
T
O
A
DD
F
IXTURES TO AN
E
XISTING
G
ROUP
1 Select the desired fixture(s)
2 Press “Record” and the button of the group to which you wish to add the fixture(s).
The following pop-up window will appear:
3 Select “MERGE with current selection.”
The selected fixtures will be added to the fixtures that were previously in the group.
T
O
R
EPLACE THE
F
IXTURES IN AN
E
XISTING
G
ROUP
1 Select the desired fixture(s)
2 Press “Record” and the button of the group you wish to replace.
The following pop-up window will appear:
3 Select “REPLACE with current selection.”
The fixtures that were previously in the group will be replaced by the selected fixtures.
The “CANCEL current command” button will abort the command and clear the command line.
The “EDIT current command” button will abort the command but will leave the command line
active so that you can edit it and then record.
T
O
R
EMOVE A
F
IXTURE FROM A
G
ROUP
1 Select the desired group to load its contents into the programmer.
2 Press “-” (minus) xx where “xx” is the fixture number(s) you wish removed from the group.