![background image](http://html1.mh-extra.com/html/lutron-electronics/grafik-eye-qsgr-3p/grafik-eye-qsgr-3p_installation-and-operation-manual_1950623061.webp)
®
GRAFIK Eye
®
QS Control Unit Installation and Operation Guide 61
Diagnostics and Special Settings
Enabling/Disabling the Timeclock
The timeclock can be enabled or disabled as desired.
1. Enter programming mode. Use the Master
buttons to select “Timeclock.” Press the
“OK” button to accept.
2. Use the Master buttons to highlight either
“Enabled” or “Disabled.” Press the “OK”
button to accept. The info screen will
confirm that your setting has been saved.
3. Exit programming mode.
OK
Master
buttons
“OK”
button
Saved
Monday
Timeclock
Enabled
Enabling/Disabling the Backlighting
The backlighting on the info screen can be enabled or disabled as
desired.
1. Enter programming mode and select
“Backlighting.” Press the “OK” button to
accept.
2. Use the Master buttons to highlight either
“Enabled” or “Disabled.” Press the “OK”
button to accept. The info screen will confirm
that your setting has been saved.
3. Exit programming mode.
Saved
Monday
Backlighting
Enabled
Diagnostics
If you are having trouble with your control unit and call
Lutron
R
Technical Support, you may be asked for
diagnostic information about your unit.
1. Enter programming mode and
select “Diagnostics.” Press the
“OK” button to accept.
2. Use the Master buttons to highlight
the option that will display the
required information. The info
screen can display the device serial
number, link information, code
version, or USB status. There is
also an option to reset the USB
connection (do this only if asked to
by Lutron
R
Technical Support).
4. Exit programming mode.
Link info
Diagnostics
Device SN
Link Info