®
GRAFIK Eye
®
QS Control Unit Installation and Operation Guide 47
Adjusting Shade Settings
(for Wired Window Treatments)
(continued)
Naming a Group of Shades
1. Enter programming mode.
2. Use the Master buttons to highlight “Shade Setup” and press
the “OK” button to accept.*
3. Use the Master buttons to highlight “Shade Labels” and press
the “OK” button to accept.
4. Use the Master buttons to highlight your desired shade group.
Press the “OK” button to accept.
5. Use the Master buttons to highlight “Custom” and press the
“OK” button to accept.
6. Use the Master buttons to scroll through the characters
(lowercase and uppercase letters, plus numbers 0 through 9).
The character you are currently changing will be underlined
on the screen. Press OK to select the character you want,
then repeat for all available characters. Choose a space (no
character) and press OK for any remaining characters. Press
the “OK” button to accept.
7. The info screen will confirm that your name has been saved.
8. Exit programming mode.
Main menu
Sensor Setup
Shade Setup
Select group
Shade Grp 1
Label shade grp
Custom
Label shade grp 1
1: A
1 / 11
OK
16
9-16
1-8
A
Master
buttons
“OK”
button
Saved
* Applicable only to units that ship with firmware version 9.003 and higher. For previous versions, skip step 2 and proceed to step 3.
Shade Setup
Timeclock
Stop If Moving
Shade Labels
