®
GRAFIK Eye
®
QS Control Unit Installation and Operation Guide 48
Adjusting Shade Settings
(for Wired Window Treatments)
(continued)
Enable/Disable “Stop If Moving” Functionality (software revision 9.003 or higher)
If the GRAFIK Eye
®
QS control unit can be configured to enable/disable the “Stop If
Moving” functionality: pressing shade column button stops the shade if it is already
moving, otherwise the shade is sent to the programmed level.
Follow the steps below to disable the “Stop If Moving” functionality (it is enabled by
default):
1. Enter programming mode.
2. Use the Master buttons to highlight “Shade Setup” and press
the “OK” button to accept.
3. In the Shade Setup menu, use the master buttons to highlight
“Stop If Moving” and press OK to accept.
4. For the desired shade column (on bottom left of QSG unit),
press the “Open” button to enable “Stop If Moving” for that
column or press the “Close” button to disable the “Stop If
Moving” feature. The display screen will change momentarily
to indicate if “Stop If Moving” is enabled or disabled for the
selected shade column.
5. LEDs on the “Open” and “Close” buttons will indicate the
current selection for the shade column.
6. Once the process is complete, hit the back button to go back
to the main menu.
Stop If Moving
For each shade
‘Open’ Enables
Shade Group N...
Stop If Moving
Disabled
OK
16
9-16
1-8
Master
buttons
“OK”
button
Main Menu
Timeclock
Wireless Mode
Shade Setup
Shade Labels
Stop If Moving
Shade Setup
Timeclock
(back) button
1
2
3
4
5
9
10
11
12
13
Shade
button group
Open button
Close button
