Language Selection
The
GRAFIK Eye
®
QS control unit is
capable of operating in the following
languages:
• English
• French
• Spanish
• German
• Italian
• Portuguese
To change the language to one of these
choices, press the Timeclock button
four times, until the “Language” screen
is displayed. (Note: Do not put the unit
in programming mode.) Use the Master
buttons to highlight your preferred
language, and press the “OK” button to
select and save.
®
GRAFIK Eye
®
QS Control Unit Installation and Operation Guide 63
OK
Master
buttons
“OK”
button
Timeclock
(back) button
OK
1
2
3
4
5
6
Pull up to remove
top faceplate
Pull down to
remove bottom
faceplate
Faceplate Removal
The faceplates may need to be removed to change the color
or to write in zone labels. To remove either faceplate, open it
fully (flush to the wall), and pull up (for the top faceplate) or
down (for the bottom faceplate) to pull the hinges out of their
slots.
Replace by sliding the hinges back into their slots.
