![background image](http://html1.mh-extra.com/html/lutron-electronics/grafik-eye-qsgr-3p/grafik-eye-qsgr-3p_installation-and-operation-manual_1950623032.webp)
®
GRAFIK Eye
®
QS Control Unit Installation and Operation Guide 32
Lutron
®
daylight sensors work with the GRAFIK Eye
®
QS Wireless control unit to automatically adjust electric light levels when natural
light in the room changes.
Wired daylight sensors may be connected to a QS Sensor Module (QSM) in the QS system.
Wireless Radio Powr Savr
TM
daylight sensors can be associated with a GRAFIK Eye
®
QS control unit or QSM. Wireless sensors must
first be associated with one of these devices to be recognized by a GRAFIK Eye
®
QS wireless system.
Daylight Sensor Setup
LUTRON
LUTRON
LUTRON
LUTRON
GRAFIK Eye
®
QS
control unit
GRAFIK Eye
®
QS
control unit
GRAFIK Eye
®
QS
control unit
QS
Sensor Module
(QSM)
QS
Sensor Module
(QSM)
QS Link
QS Link
Wired
Daylight
Sensor
Wireless
Daylight Sensor
Wireless
Daylight Sensor
The following steps are required to program daylight sensors with a GRAFIK Eye
®
QS control
unit. Instructions for each step are on the pages that follow.
1. Connect wired sensors, or associate wireless sensors.
2. Assign sensors to zones.
3. Calibrate the system to achieve the desired response to natural light.
Note:
The Daylighting feature is not supported for the DMX load type.