![background image](http://html1.mh-extra.com/html/lutron-electronics/grafik-eye-qsgr-3p/grafik-eye-qsgr-3p_installation-and-operation-manual_1950623036.webp)
®
GRAFIK Eye
®
QS Control Unit Installation and Operation Guide 36
Lutron
R
Pico
®
wireless controls can be associated with a GRAFIK Eye
®
QS system to control the light level of a specific zone or to act
as a scene controller. Pico
®
wireless controls can be associated directly to GRAFIK Eye
®
QS Wireless control units, or to a wired or
wireless GRAFIK Eye
®
QS control unit via a QS Sensor Module (QSM) wired on the QS link.
Pico
®
Wireless Control Setup
Functionality of the Pico
®
wireless control
Zone Function
1
Scene Function
2
Top (On) Button
All assigned zones 100%
Scene 1
Center (Preset) Button
(3B and 3BRL) or
second button from top
(4B-Gxx-L31)
All assigned zones at programmed preset
level
(Press and hold to save current levels on
assigned zone as preset)
Scene 2
Raise/Lower Buttons
(if available)
Vary intensity of all assigned zones
Vary intensity of all zones affected by
current scene
Bottom (Off) Button
All assigned zones Off
Scene Off
LUTRON
LUTRON
GRAFIK Eye
®
QS
control unit
GRAFIK Eye
®
QS
control unit
QS Sensor Module
(QSM)
QS Link
Pico
®
Wireless
Control
Pico
®
Wireless
Control
Available Pico
®
Wireless Control
Models
2-button
(2B)
3-button
(3B)
2-button
with
raise/lower
(2BRL)
3-button
with
raise/lower
(3BRL)
4-button
zone control
(4B-Gxx-L01)
4-button
scene control
(4B-Gxx-L31)
1 In zone function, user can program preset levels for assigned zones on any Pico
®
wireless control button. Instructions for reprogramming zone levels are provided on the next page.
2 In scene function, the starting scene of the Pico
®
wireless control is selectable and zone levels in each scene can be adjusted by following the instructions in
Scene Setup
.