![background image](http://html1.mh-extra.com/html/lutron-electronics/grafik-eye-qsgr-3p/grafik-eye-qsgr-3p_installation-and-operation-manual_1950623040.webp)
®
GRAFIK Eye
®
QS Control Unit Installation and Operation Guide 40
Enabling/disabling the IR receiver on the GRAFIK Eye
®
QS control unit:
Note:
These steps will also enable or disable the IR terminals on the
GRAFIK Eye
®
QS control unit.
1. Enter programming mode.
2. Use the Master buttons to highlight “IR Setup” and press the “OK” button
to accept
3. Use the Master buttons to highlight “Integral IR” and press the “OK” button
to accept.
4. Use the Master buttons to highlight either “Enabled” or “Disabled” and
press the “OK” button to accept. The info screen will confirm that your
settings have been saved.
5. Exit programming mode.
Saved
Saved
IR Setup (continued)
Main menu
Wireless Mode
IR menu
Timeclock
Programming
IR Setup
Integral IR
Integral IR
Enabled
OK
Master
buttons
“OK”
button