Lucent Technologies CAJUN M770, User Manual

Page: 101 / 266

Chapter 6 Managing Virtual Ports
Cajun M770 ATM Switch User’s Guide 83
Managing Connections
Listing all virtual circuits
To list the details of all virtual circuits, enter the
vport connections all
command.
The
vport connections all
command displays all SVCs, PVCs, and internal virtual
circuits such as ILMI signalling that are set up on the M770 ATM Switch.
Information displayed in the output is described in Table 6.7.
Listing switch virtual circuits
To list the details of all SVCs, enter the
vport connections svcs
command.
The
vport connections svcs
command displays the information described in
Table 6.7.
Command:
M15-155s8:/>vport connections all
Command:
M15-155s8:/>vport connections svcs [nomesh] [addr] [td]
[<vport id>] [src|dst] [<vportid>] [dir]
Example:
M15-155s8:/>vport connections svcs nomesh addr 8.1.0
Parameters:
[nomesh] Lists SVCs passing through the vport (except for
LANE mesh SCVs)
[addr] Lists the ATM addresses where available
[td] Displays the ATM Traffic Descriptor
[<vport id>]
Lists all SVCs passing through the vport
[<vport id>]
[src|dst]
Lists the incoming/outgoing SVCs from/to the
vport
[<vport id>]
[<vport id>]
Lists all SVCs between the two vports
[<vport id>]
[<vport id>]
dir
Lists all SVCs from the 1st vport to the 2nd vport