Lucent Technologies CAJUN M770, User Manual

Page: 216 / 266

Chapter 17 Managing System Commands
198 Cajun M770 ATM Switch User’s Guide
Viewing the current switch memory allocation
You can view the current breakdown of memory allocation on the modules. The total
amount of memory is equal to the amount of RAM memory you have in the module.
To display the current M770 ATM Switch memory allocation, use the
system memory
command.
Viewing time received from the time server
A time server is a server that provides the date and time, (as specified by RFC 868),
such as a UNIX machine running ‘timed’ to the M770 ATM Switch. For information
about setting up a time server, see Viewing or Changing the IP Time Server Address in
Chapter 4, Managing Miscellaneous Commands.
To view the current time received from the time server, use the
system time
command.
Manually changing the date or time on a Cajun M770 ATM Switch
You can manually change the date or time on the switch. You do not have to enter both
the date and time, only the parameter that you wish to change. Note that the date and
time will be reset, when you reboot the switch.
To change the date or time on a switch, use the
system time set
command.
Command:
M15-155s8:/>system memory
Output:
Free memory: 22000 kbytes
Total memory: 32768 kbytes
Command:
M15-155s8:/>system time
Output:
The time is 14:28:04 14 Aug 1998 GMT
Command:
M15-155s8:/>system time set <date> <time>
Example:
M15-155s8:/>system time set 08/25/98 15:22
Parameters:
<date>
Enter the date in the form MM/DD/YY or DD MMM
YYYY. Where D is the day, M is the month, and Y is the
year.
<time>
Enter the time in the form HH:MM or HH:MM:SS.
Where H is the hour, M is the minute, and S the seconds.