Lucent Technologies CAJUN M770, User Manual

Page: 184 / 266

Chapter 14 Managing the LECS
166 Cajun M770 ATM Switch User’s Guide
To create communication connection to a remote candidate, use the
lane lecs
resilient create
command:
Note: When you create a communication connection to a remote switch hosting a
resilient LECS, the remote M770 ATM Switch will automatically create a respective
candidate for the local LECS.
Deleting a resilient LECS election candidate
You can delete any election candidate that you manually created, using the
lane
lecs resilient delete
command and specifying the endpoint address. The
connection to the candidate on the remote M770 ATM Switch will be dropped
which will result in the deletion of that candidate.
To delete a resilient LECS election candidate, use the
lane lecs resilient delete
command:
Command:
M15-155s8:/>lane lecs resilient create <address>
Parameters:
<address>
This is the address the candidate uses in order to
communicate with other candidates on the network.
To construct the address, you must append a selector
of “7F” to the modules address.
Alternatively type the
lane lecs resilient show
command
on the remote switch and use the end-point address
at index 0.
Note, there should only be one election entry for
each resilient LECS participating in the election.
Command:
M15-155s8:/>lane lecs resilient delete <address>