Lucent Technologies CAJUN M770, User Manual

Page: 212 / 266

Chapter 17 Managing System Commands
194 Cajun M770 ATM Switch User’s Guide
To download a software image over TFTP, use the
system download tftp
command.
Uploading over TFTP
In order to upload over TFTP (Trivial File Transfer Protocol), the remote file server
must be accessible from the ELAN to which the management LEC belongs or from the
MSPV Ethernet Sideband port. To verify this connectivity you should ping from the
file server to the IP of the LEC or to the IP of the MSPV.
To upload a file over TFTP, use the
system upload tftp
command.
Command:
M15-155s8:/>system download tftp <ip_address> <filename> [<gateway>]
Example:
M15-155s8:/>system download tftp 194.31.222.23 m770ATM
Parameters:
<ip_address>
The IP address of the remote TFTP server.
<filename>
The full name of the file on the TFTP server.
If the file is contained in a sub-directory, the
complete path and filename must be supplied.
<gateway>
The gateway through which you should perform
the download:
lec - through the LANE Client
mspv - through the M-SPV/M-SPX/M-SPS
(optional, default value: lec)
Command:
M15-155s8:/>system upload tftp <ip_address> <flashfile>
<destination_filename> [<gateway>]
Example:
M15-155s8:/>system upload tftp 194.31.222.23 m770ATM m770ATM_new
Parameters:
<ip_address>
The IP address of the remote TFTP
server.
<flashfile>
The full name of the file in flash memory.
<destination_filename>
The full destination file name on the
remote TFTP server. If the file is
contained in a sub-directory, the complete
path and filename must be supplied.
<gateway>
The gateway through which you should
perform the upload:
lec - through the LANE Client
mspv - through the M-SPV/M-SPX/M-SPS
(optional, default value: lec)