Lucent Technologies CAJUN M770, User Manual

Page: 146 / 266

Chapter 10 Managing PNNI Routing
128 Cajun M770 ATM Switch User’s Guide
Setting PNNI node restrict transit flag
Use the following command to set the PNNI restrict_transit flag:
Setting PNNI node restrict transit flag to default value
Use the following command to set the restrict transit flag to its default of ‘no’.
PNNI Summary Tables
Showing PNNI summary table
Use the following command to show the configured PNNI summary table:
Command:
M15-155s8:/>route pnni config restrict_transit set
<no|yes>
Examples:
Note: This request will define this switch as a transit/
non-transit switch
i.e. no setup call through this node
Changes will take effect immediately
Command:
M15-155s8:/>route pnni config restrict_transit default
Examples:
Note: This request will set default value (no) for
restrict transit flag
i.e. setup call can through this node
Changes will take effect immediately
Command:
M15-155s8:/>route pnni config summary show
Examples:
Summary: Type = internal
Len = 104 bits
Prefix = 39.84.0f.80.01.bc.61.de.81.00.00.60.00
Suppress = false
State = advertising
RowStatus = active
Local Ra:
Len Prefix
-----------------------------------------------------------------
Summary: Type = internal
Len = 104 bits
Prefix = 39.84.0f.80.01.bc.61.de.81.00.00.78.00
Suppress = false
State = advertising
RowStatus = active
Local Ra:
Len Prefix
-----------------------------------------------------------------
152 39.84.0f.80.01.bc.61.de.81.00.00.78.00.00.00.6f.00.00.40
152 39.84.0f.80.01.bc.61.de.81.00.00.78.00.00.00.6f.00.00.60
152 39.84.0f.80.01.bc.61.de.81.00.00.78.00.00.40.0d.63.01.f7