Lucent Technologies CAJUN M770, User Manual

Page: 68 / 266

Chapter 6 Managing Virtual Ports
50 Cajun M770 ATM Switch User’s Guide
Table 6.1 Output from the vport show command
Field Description
Virtual Port
Id The virtual port. This is displayed in the format
<slot>.<port>.<virtual port number>.
Admin State The administrative state of the virtual port. If the state is UP
then this virtual port is enabled. If the state is DOWN then this
virtual port is disabled. This will occur when you disable the
virtual port using the command-line interface or via
management.
Oper State The operational state of the virtual port. If the state is UP then
this virtual port is functional. If the state is DOWN then this
virtual port is not functional. This could be due to a problem
with ILMI or ILMI has been disabled due to a problem with the
physical connection.
Stack Type The type of signalling used. This can be UNI 3.0, UNI 3.1,
UNI 4.0, IISP 3.0, IISP 3.1 or PNNI 1.0.
User/Net The signalling profile of the virtual port. This can be either
“user” or “network”. For more information on which signalling
profile should be used, refer to ATM port configuration in
Chapter 2 Getting Started.
Q.SAAL State The state of the signalling data-link layer (Q.SAAL-SSCOP).
VPI Range The VPI range assigned to the virtual port.
VCI Range The VCI range assigned to the virtual port.