Lucent Technologies CAJUN M770, User Manual

Page: 187 / 266

Cajun M770 ATM Switch User’s Guide 169
Chapter 15
Managing the LES/BUS
This chapter describes how to use the command-line interface to manage the LES/
BUS in a Cajun M770 ATM Switch. For information about how to access and use
the Cajun M770 ATM Switch command-line interface, see Chapter 3, How to Use
the Command-line Interface.
Creating a new LES
Each Cajun M770 module can provide up to 16 combined LES/BUS. If the LECS is
hosted in a Cajun M770 then a Lucent LES will use a proprietary “automatic LES
address determination method” to register with the LECS. For more information
about the proprietary method and different types of LES modes supported, see
Chapter 13, LANE Services.
When creating a new LES you should note the following:
•
If the LECS is hosted in a non-Lucent device, the LES mode should be set to
“manual”.
Note: If the LES mode is set to “manual” and you move the LES then you will
need to manually re-configure the LECS to find the LES.