Chapter 5
Managing Physical Ports
44
Cajun M770 ATM Switch User’s Guide
To configure tx rate limiting for a physical port, use the
pport set txrate
command.
Note:
The M770 ATM Switch CAC feature is aware of any rate limit set on a port
and will not allow connections to be setup which could exceed the current limit. All
UBR connections are accepted as usual, however these may suffer cell loss if the
total traffic rate exceeds the current rate limit.
Command:
M15-155s8:/>pport set txrate <pport> <rate>
Example:
M15-155s8:/>pport set txrate 8.3 100
Parameters:
<pport id>
The physical port identifier in the form
<slot>.<port number>.
<rate>
To specify the port transmit rate in Kbits per
second.
You can set the minimum rate capping to
64K bit per second.
Summary of Contents for CAJUN M770
