Lucent Technologies CAJUN M770, User Manual

Page: 180 / 266

Chapter 14 Managing the LECS
162 Cajun M770 ATM Switch User’s Guide
To change the location and type of the local LECS, use the
lane lecs location
local
command:
Remote LECS
When creating or changing to a remote LECS:
•
If a local LECS already exists on the switch then you are warned that it will be
deleted and the switch will look for a LECS at the specified remote address.
To change the location of the remote LECS, use the
lane lecs remote
command:
Command:
M15-155s8:/>lane lecs location local {wka | <selector>}[{simple | resilient}]
Parameters:
wka simple
An active local simple LECS is created, using
the WKA. Remote clients that make requests
for the WKA will be routed to this LECS via
PNNI.
<selector> simple
An active simple LECS is created, using the
modules address with the specified selector.
wka resilient
A resilient LECS is created.
This LECS will enter the election process and if
elected will be the “active LECS”. Remote
clients that make requests for the WKA will be
routed to this LECS via PNNI.
<selector> resilient
A resilient LECS is created, using the modules
address with the specified selector.
The created LECS will enter the election
process and if elected will be the active LECS.
Modules that are configured to use the elected
resilient LECS will direct clients to this LECS.
Command:
M15-155s8:/>lane lecs location remote {elected | wka | <address>}
Parameters:
remote elected
Module will wait for notification via PNNI routing
of the address of the elected resilient LECS.
wka
Module will seek a remote LECS, that is
advertising the WKA.
<address>
Module will seek a remote LECS, that is
advertising the specific ATM address on the
network.