Lucent Technologies CAJUN M770, User Manual

Page: 150 / 266

Chapter 10 Managing PNNI Routing
132 Cajun M770 ATM Switch User’s Guide
Set PNNI node timers to default values
Use the following command to set the PNNI node timers to their default values.
Set PNNI node timers
Use the following command to set PNNI node timers.
Command:
M15-155s8:/>route pnni config timers default
<index(All=99)>
Parameters:
<index> the index of the timer , to set all timers type
99
Examples:
Note: This request will set value for timers , according
to the index parameter.
Changes will take effect on run time values
Command:
M15-155s8:/>route pnni config timers set <index>
<value>
Parameters:
<index> the index of the timer as appear in the ‘show’
screen.
<value> the value that the selected timer will get.
Examples:
route pnni config timers set 1 15
Note: This request will set value for timers , according
to the index parameter.
Changes will take effect on run time values.