Lucent Technologies CAJUN M770, User Manual

Page: 217 / 266

Chapter 17 Managing System Commands
Cajun M770 ATM Switch User’s Guide 199
Viewing the current time zone
A time zone is defined by the name of the time zone and the difference in hours from
Greenwich Mean Time (G.M.T.).
To view the current time zone, use the
system time zone
command.
Manually changing the time zone
You can manually change the time zone using the
system time zone
command.
To set the time zone back to G.M.T. use the following command:
Using terminal commands
These commands allow you to configure how the Cajun M770 ATM Switch displays
output on the terminal.
Viewing the pager status
The pager is a facility that enables you to view the information that the M770 ATM
Switch outputs to the screen, a number of lines at a time. By default, the pager is
enabled.
To display the pager status, use the
terminal pager
command.
Command:
M15-155s8:/>system time zone
Example:
Current Time Zone is EST -5
Command:
M15-155s8:/>system time zone [<name> <+/- GMT>]
Example:
M15-155s8:/>system time zone EST - 5
Parameters:
<name>
This is the name of the time zone. You can enter up
to ten characters
<+/-GMT>
This is the time difference in hours from G.M.T.
Command:
M15-155s8:/>system time zone GMT 0
Command:
M15-155s8:/>terminal pager
Output:
pager is enabled