Lucent Technologies CAJUN M770, User Manual

Page: 241 / 266

Appendix B Using BOOT Loader
Cajun M770 ATM Switch User’s Guide 223
Changing the main image
To change the main image that the M770 ATM Switch will next run, use the
flash
default
command.
Note:
This command checks the integrity of the selected image therefore it may take a
few seconds for the cursor to return.
Viewing the default boot loader image
To view the default boot loader image that the M770 ATM Switch will load, use
the
flash loader
command.
Changing the default boot loader image
To change the default boot loader image that the M770 ATM Switch will load, use
the
flash loader
command.
Note:
This command checks the integrity of the selected image therefore it may take a
few seconds for the cursor to return.
Command:
M15-155s8:/>flash default <filename>
Example
M15-155s8:/>flash default m770ATM_new
Parameter:
<filename>
The name of the image that the M770 ATM
Switch will next run.
Command:
M15-155s8:/>flash loader
Output:
The current flash loader boot loader is
“boot_loader.1.2.5”
Command:
M15-155s8:/>flash loader <filename>
Example:
M15-155s8:/>flash loader boot_loader.1.2.7
Parameter:
<filename>
The name of the default boot loader image
that the M770 ATM Switch load.