Lucent Technologies CAJUN M770, User Manual

Page: 22 / 266

Chapter 1 Introduction
4 Cajun M770 ATM Switch User’s Guide
• Virtual ports for Virtual Path (VP) tunnelling
• SNMP Network Management using LANE Client
• Command line Interface (CLI) management available remotely by using Telnet
and/or directly by using the serial RS-232 port on the module front panel.
• Trivial File Transfer Protocol (TFTP) for software and configuration download
and for configuration uploads (stores the configuration in a server)
• Full LAN Emulation (LANE) suite consisting of a LECS (LAN Emulation
Configuration Server), a combined LES (LAN Emulation Server) and BUS
(Broadcast Unknown Server), and a management LEC (LAN Emulation Client)
• Proprietary Resilient LECS.
• Proprietary Resilient and Distributed LAN Emulation Services.
• Multiple LES/BUS per module (up to 16)
• LECS support of multiple ELANs (up to 64)
• LECS ELAN client mapping (for secure ELANs)
• Efficient Point-to-Multipoint support using a minimal duplication scheme
(patented)
• Up to 4K Point-to-Multipoint roots per module
• Up to 5460 Point-to-Multipoint branches or leaves per module
• Up to 210 OC-3 ports in a single switch (42 OC-12 ports).
• Signaling performance of 130 setups/sec with PNNI running per Module!
Performance improves as you add modules
• Support for Single-domain and Dual-domain M770 ATM switch Upper
Backplanes
• SNMP (Simple Network Management Protocol) management over IP over LAN
emulation, using the following MIBs (Management Information Bases):
— MIB II (RFC 1213)
— Interface MIB (RFC 2233)
— ATM MIB, ATM-2 MIB (RFC 1695)
— SONET/SDH MIB (RFC 1595)
— PNNI MIB
— LEC MIB
— LANE Server MIB
— Private MIB.