Lucent Technologies CAJUN M770, User Manual

Page: 102 / 266

Chapter 6 Managing Virtual Ports
84 Cajun M770 ATM Switch User’s Guide
Listing permanent virtual circuits
To list the details of all PVCs, enter the
vport connections pvcs
command.
Note: When the above command is used both PVCs that are enabled and disabled
will be listed.
The
vport connections pvcs
command displays the information described in
Table 6.7.
Command:
M15-155s8:/>vport connections pvcs [td] [<vport id>]
[<vport id>]
Example:
M15-155s8:/>vport connections pvcs 8.2.0
Parameters:
[td]
Displays the ATM Traffic Descriptor
[<vport id>]
Lists all PVCs passing through the vport
[<vport id>]
[<vport id>]
Lists all PVCs between the two vports.
Table 6.7 Output from the vport connections command
Field Description
slot.port.vpi.vci The physical port, VPI, and VCI that are assigned to
the connection. For a PVC, this is the Virtual Circuit
Link (VCL).
rXcount The number of cells received on this connection.
PD Indicates whether or not packet discard is enabled.
“N” indicates that it is not enabled.
SCAT The service category that is used for the virtual circuit.
Up Time Indicates how long the virtual circuit has been active
in days, hours, minutes, seconds, and hundredths of a
second.