Menu item
Description
Sides
On
Off*
Print on both sides of the paper.
Separator Sheets
None*
Before Job
After Job
Specify whether to insert blank separator sheets when printing.
Separator Sheet Source
Tray [X] (1*)
Specify the paper source for the separator sheet.
Output Bin
Standard Bin
Specify the output bin for received faxes.
Fax Footer
On
Off*
Print the transmission information at the bottom of each page from a received
fax.
Fax Footer Time Stamp
Receive*
Print the time stamp at the bottom of each page from a received fax.
Punch
Off*
2 holes
3 holes
4 holes
Punch holes along the edge of the printed fax document.
Note:
This menu item appears only when a multiposition staple, hole punch
finisher is installed.
Staple
Off*
1 staple
2 staples
Staple the printed fax document.
Note:
This menu item appears only when a finisher is installed.
Holding Faxes
Held Fax Mode
Off*
Always On
Manual
Scheduled
Hold received faxes from printing until they are released.
Note:
An asterisk (*) next to a value indicates the factory default setting.
Admin Controls
Menu item
Description
Enable Fax Receive
On*
Off
Set the printer to receive fax.
Note:
An asterisk (*) next to a value indicates the factory default setting.
Understanding the printer menus
106
Summary of Contents for XC8155
