Lexmark XC8155, User Manual

Page: 154 / 317

Adjusting the default headphones volume
Headphones volume will reset to default value after the session is logged out, when the printer wakes from
Sleep or Hibernate mode, or after a power
‑
on reset.
1
From the control panel, select Settings > Device > Accessibility > Headphone Volume .
2
Select the volume.
Configuring the fax speaker settings
1
From the home screen, touch Settings > Fax > Fax Setup > Speaker Settings .
2
Do the following:
•
Set the Speaker Mode to Always On .
•
Set the Speaker Volume to High .
•
Activate the Ringer Volume.
Networking
Note: Purchase a MarkNet
TM
N8370 wireless network adapter first before setting up the printer on a wireless
network. For information on installing the wireless network adapter, see the setup sheet that came with the
adapter.
Connecting the printer to a wireless network using Wi
‑
Fi Protected Setup
(WPS)
Before you begin, make sure that:
•
The access point (wireless router) is WPS
‑
certified or WPS
‑
compatible. For more information, see the
documentation that came with your access point.
•
A wireless network adapter is installed in your printer. For more information, see the instructions that came
with the adapter.
•
Active Adapter is set to Auto. From the home screen, touch Settings > Network/Ports > Network Overview
> Active Adapter .
Using the Push Button method
1
From the home screen, touch Settings > Network/Ports > Wireless > Wi
‑
Fi Protected Setup > Start Push
Button Method .
2
Follow the instructions on the display.
Using the personal identification number (PIN) method
1
From the home screen, touch Settings > Network/Ports > Wireless > Wi
‑
Fi Protected Setup > Start PIN
Method .
2
Copy the eight
‑
digit WPS PIN.
3
Open a web browser, and then type the IP address of your access point in the address field.
Maintaining the printer 154