WaveRunner 6 Zi Oscilloscopes
87
WR6Zi-GSM-E
Starting TriggerScan
After you have run the Trainer, the Trigger List displays a list of smart
trigger setups. You can add or remove trigger setups. You can also
update the selected smart trigger setup. Once you have made any
changes to the Trigger List, you are ready to start scanning.
1.
Touch
Trigger → Trigger Setup...
from the menu bar.
2.
On the
Trigger
dialog, click the
TriggerScan
tab and its
corresponding dialog is shown.
3.
If you want to add a new trigger setup, touch the
Trigger
tab and
set the new trigger as desired on the
Trigger
dialog. Then, back on
the
TriggerScan
dialog, touch the
Add New
button to append the
new trigger to the
Trigger List
.
4.
If you want to replace the selected trigger setup with the current
trigger setup, highlight the setup in the Trigger List and touch the
Update Selected
button.
5.
If you want to shown a specific trigger setup on the Trigger List,
highlight its corresponding row on the list, and then touch the
Load Selected
button.
Note
: If you want to delete all trigger setups in the Trigger List,
touch the
Delete All
button.
6.
If you want to delete a trigger setup, highlight the setup in the
Trigger List and touch the
Delete Selected
button.
7.
All trigger setups can be deleted regardless of selections on the
Trigger List with one step by touching the
Delete All
button.
5.
Once you have made any changes to the Trigger List, touch the
Trainer button and then restart the scan by touching the
Start
Training
button on the Trigger Scan Trainer pop-up. The
oscilloscope automatically sequences through all the trigger
setups.
