Getting Started Manual
WR6Zi-GSM-E
52
Another example is seen in the buttons appearing at the bottom of the
Measure
Px
dialogs. The button may be selected in order to display the
functions named on the buttons (sometimes labeled as
Actions
):
Actions for Trace buttons on the Cx dialog.
Using these buttons allow you to remain in the Measure dialog while
setting up a Math trace on a parameter measurement.
Message Bar
At the bottom of the oscilloscope display is a narrow message bar. The
current date and time are displayed at the far right. Status, error, or
other messages are also shown in this area.
Turning on Channels and Traces
Note
: If you want to display each trace on its own grid automatically,
enable Autogrid by touching
Display → Autogrid
from the menu bar.
On the front panel, press a channel select button to display the
trace label for that input channel and turn on the channel.
Turn on a math function trace by touching
Math → Math Setup...
from the menu bar. Touch the corresponding
On
checkbox to
activate the desired trace.
You can also quickly create traces (and turn on the trace label) for
math functions and memory traces, without leaving the Vertical
Adjust dialog, by touching the icons at the bottom of the Vertical
Adjust dialog.
