LeCroy WaveRunner 6Zi Getting Started Manual Download Page 12

Page: 12 / 219

Getting Started Manual

WR6Zi-GSM-E

Welcome

Thank you for purchasing a LeCroy product. We're certain you'll be
pleased with the detailed features so unique to our instruments.

This

WaveRunner 6 Zi Online Help

file may be accessed from your

oscilloscope with the intention of Operator's Manual usage. Sections can
be printed and the file itself can be saved to a USB memory device.

The information/content in this help file is arranged in the following
manner:

WaveRunner 6 Zi Features

First, we cover the hardware and software features of your instrument in
the following sections:



Hardware



Basic Controls



Probe and Signal Connection Interfaces



Display Dashboard



Turning on Channels and Traces

Core Oscilloscope Functions

This section covers the core functions of LeCroy oscilloscopes.

Compatible Options and Accessories

Subsequent sections demonstrate the related

Options

and

Accessories

available for your product.

Reference

The Reference section is set aside and covers items like

Technical

Support

contact information and

Safety Requirements

. The LeCroy

website at

www.lecroy.com

always maintains the most current

specification information. The website should always be checked for
frequent updates.

Support

When your product is delivered, verify that all items on the packing list or
invoice copy have been shipped to you.

Summary of Contents for WaveRunner 6Zi




























































































































































































































Search results

Summary of Contents for WaveRunner 6Zi

Reviews:

Brands by name

Popular brands

LeCroy WaveRunner 6Zi, Getting Started Manual

Search results

Summary of Contents for WaveRunner 6Zi

Reviews:

Brands by name

Popular brands