Getting Started Manual
WR6Zi-GSM-E
118
Regardless of how you performed the previously described initial steps,
at this point access your corresponding
Fx
dialog if you want to change
other setup items as follows:
You can modify the source of your waveform used on a Math
trace using the
source (Source 1)
control.
On the far left of the Fx dialog, the single and dual buttons are
available for one math function or math-on-math, respectively.
The
web edit
button is used to access the Processing Web and
sequence highly-detailed math functionality.
Touch the
Graph
button, and then touch inside the
Graph with
control to select a graph mode (in this case
Histogram
).
At this point, access the Histogram right-hand dialog by touching the
Histogram tab on the far-right of the screen. Follow the final 1 - 4 steps in
the previous
Single Parameter Histogram Setup Using Measure
instructions.
Viewing Thumbnail Histograms (Histicons)
Histicons are miniature histograms of parameter measurements that
appear below the grid. These thumbnail histograms let you see at a
glance the statistical distribution of each parameter.
