Getting Started Manual
WR6Zi-GSM-E
150
Saving and Recalling Setups
The Save/Recall Setup dialogs allow for quick saving and recalling of up
to six oscilloscope panel settings internally on your instrument. If
desired, you can also save and recall your oscilloscope panel settings as
an .lss file to a specific hard disk location, a network location, or USB
drive.
Saving Oscilloscope Setup(s)
Access the
Save Setup...
dialog by either selecting
File → Save Setup...
from the menu bar or clicking the
Save Instrument Setup
button on the
main Save/Recall dialog. Now use one of the following two methods to
save setup(s).
S
AVING
S
ETUP
(
S
)
I
NTERNALLY ON
Y
OUR
I
NSTRUMENT
Save your settings
internally on your instrument
by touching inside one
of the six
SetupX
data entry controls on the
Save to Internal Setup...
part
of the screen and providing a name. Now, touch its corresponding
Save
button directly to the left.
Your setup file is then saved to the
D:\Internal Setups
location on your
instrument and the current date/time is shown above the
SetupX
data
entry control.
OR
S
AVING
S
ETUP
(
S
)
D
IRECTLY TO A
F
ILE
Save your setup(s)
directly to a file
by touching the
File
button on the
Save To
section on the dialog. Now, touch inside the
Save files in
directory
control and provide a path to the destination folder. Or touch
Browse
to navigate to the destination folder. Finally, touch the
Save
Now
button.
Recalling Oscilloscope Setup(s)
Access the
Recall Setup...
dialog by either selecting
File → Recall Setup...
from the menu bar or clicking the
Recall Instrument Setup
button on the
main Save/Recall dialog. Now use one of the following two methods to
save setup(s).
