Kurtz Ersa HR 600/2, Translation Of The Original Operating Manual

Page: 72 / 169

6 | Function description
The user interface
6.4.3.2 The work area [Placement]
Start Camera and light Placement View Extras
Live video Image-functions RPC AOI Illumination
Top LED light Bottom LED light RPC light
Switch
ON/OFF
Camera
selection
Zoom Transparency
Save Set Dismiss
Placement
Soldering
Placement
Profile library
Archive
Please choose an activity
System ready
Actual parameters Data table System settings System info
Save target position
Actual parameters
X-Axis Y-Axis Z-Axis Angle of rotation
Current image
External viewer
Open
Parameters Value
Profile
Document name
Recording date
Profile ID
PCB pos. X
User
Profile printout
29.11.2014 12:47
Bottom left
Profile parameters
Archive Profiles Online-HR 600
Profile Board Component Sensor Automation Adaptor (head) Head position
Tracking ID
PCB pos. Y
Style
Undefined
Current image
Desoldering parameters
Fig. 18: The work area [placement]
If [Placement] is enabled in the functional area, buttons to position heads will ap-
pear in the work area. In the display window, the [Current image] window will ap-
pear. The current position values can be read from the status bar. With regard to
this, please read Chapter The status bar [
}
84].
– [Move axis left]: Allows moving the heads manually to the left. This is also pos-
sible with the key combination [Ctrl] + [Left arrow key].
By pressing the scroll wheel while holding down the mouse button, the move-
ment can be sped up or slowed down. If an overlay is displayed in the display
window, you can move this overlay to the left.
– [Move axis right]: Allows moving the heads manually to the right. This is also
possible with the key combination [Ctrl] + [Right arrow key].
By pressing the scroll wheel while holding down the mouse button, the move-
ment can be sped up or slowed down. If an overlay is displayed in the display
window, you can move this overlay to the right.
– [Move axis foreward]: Allows moving the heads manually forward. This is also
possible with the key combination [Ctrl] + [Bottom arrow key].
By pressing the scroll wheel while holding down the mouse button, the move-
ment can be sped up or slowed down. If an overlay is displayed in the display
window, you can move this overlay down.
Ersa GmbH 3BA00207_01 Operating Instructions HR 600_2 | Rev. 3 72 / 169