Kurtz Ersa HR 600/2, Translation Of The Original Operating Manual

Page: 69 / 169

6 | Function description
The user interface
6.4.3.1 The work area [Soldering]
Start Camera and light Placement View Extras
Connect
Data accesses Control Record processes Analysis functions
Delete Archiving
Recording
Diagram
settings
Soldering
Placement
Profile library
Archive
Save target position
System info
Power monitor:
Soldering
System ready
Standby
Actual parameters Data table System settings System info
System parameters
Unit-ID:
Serial number:
Firmware
Expert data
Internal
temperature:
Operating hours:
T. heater hours:
Laser:
Fan:
Vacuum Pip.
Vacuum PL.
Cooling bottom:
Head motor:
End switch top:
End switch bottom:
Pipette motor:
End switch pipette:
Top heater:
Bottom heater:
up:
up:
down:
down:
X-Axis Y-Axis Z-Axis Angle of rotation
Open Save Print
CSV
Export
Cursor
Add
dot
Delete
dot
Delete
all dots
Change
user
Setpoint
curve
Online-HR 600 Current image
Archive Profiles
Style
Fig. 17: The work area [soldering]
If [Soldering] is enabled in the functional area, the visual displays and buttons for
the soldering process will appear in the work area. In the display window, the [On-
line-HR 600] window and the [Start] tab will appear automatically.
Shows the current temperature in [°C] of the sensor that regulates the profile tem-
perature. You can select the thermocouples and sensors in the soldering profile
(standard = TE1). If the value [0.0 °C] is displayed, there is no thermocouple con-
nected to TC1 or TC2 sockets. With respect to this, please read the chapter Profiles
[
} 102].
– [Start or stop soldering process ]: Starts or stops the soldering process immedi-
ately, or interrupts a soldering process started in the automation bar. The sol-
dering profile settings of the last profile chosen are used. These profile settings
are displayed in the [Actual parameters] parameter window. Keep the travel
path of the axles clear!
During the soldering process, the button is displayed as a [Stop soldering pro-
cess] stop button. It terminates the soldering and desoldering process. The
component is stored or the head moves to the parking position. With respect
to this, please read the chapter Profiles [
} 102].
– [Start or stop desoldering process]: Starts or stops the soldering process imme-
diately, or interrupts a desoldering process started in the automation bar. The
soldering profile settings of the last profile chosen are used. These profile set-
tings are displayed in the [Actual parameters] parameter window. Keep the
Ersa GmbH 3BA00207_01 Operating Instructions HR 600_2 | Rev. 3 69 / 169