6 | Function description
Working with the HR 600/2 unit
c) Save the change.
Placement mode
ü
To position a component:
a) Enable the [Setting down and move until it touches] radio button in the [Place-
ment mode] frame.
ð
The component is placed onto the landing position, until it comes into contact
with the circuit board.
ü
To discard a component:
a) Enable the [Dropping and define the discharge height] radio button in the
[Placement mode] frame.
ð
The entry field [Drop height] can now be edited.
b) Enter a value in [µm] into the entry field.
ð
The component is driven to the landing position and lowered, until the [Drop
height] is reached. The component is then discarded.
a) Save the change.
To save changes in the profile:
a) Click on the [Profile parameters] button in the [Overwrite] frame.
ð
Changes are saved in the profile.
Ersa GmbH
3BA00207_01 Operating Instructions HR 600_2 | Rev. 3
119 / 169
