Kramer Electronics Ltd.
VS-1616DN-EM
– Using the Input / Output Cards
61
HS-OUT2-F16 Output Card
Parameter
Description
Default
Reset
Output
Re-power
—Power cycle the port.
Factory default
—Perform a factory reset to default values of the port.
Re-power
Video-
Freeze
Freezes/unfreezes the output video.
Off
On
Off
Picture
Aspect
Ratio
Sets the picture aspect ratio.
Full
Crop
Best-Fit
Best-Fit
Out
Resolution
Sets the output video resolution.
640x480x60
720x480px60
720x576px50
800x600x60
1024x768x60
1280x720px50
1280x720px60
1280x1024x60
1600x1200x60
1920x1200x60
1920x1080px50
1920x1080px60
Native
Note
: To ensure a stable output signal using either WUXGA
(1920X1200) or UXGA (1600X1200), set the output to 8 bit color depth
in the Deep Color menu.
Note
: For best switching performance ensure that both inputs on the
card have the same frame rate.
1920x1080px60
Switch
Speed
When switching between different sources the switching time can be
reduced by setting the fast switch level (Ex-fast Switch, Fast Switch or
Normal Switch).
Ex-fast
FPGA VER
The FPGA version.
FW VER
The firmware version.
SPEC
VER:0107
For internal use only.
AUTO
SYNC OFF
Determines the timeout period before turning off the output video signal
after no input signal is detected. (A black output video signal is sent
during this predetermined timeout period.)
0
—(Default) Do not turn off the output video signal (keep the output
signal alive indefinitely.
1
—Turn off the output signal 5 minutes after detecting a loss of the input
video signal.
2
—Turn off the output signal 10 seconds after detecting a loss of the
input video signal.
0