Kramer Electronics Ltd.
VS-1616DN-EM
– Using the Input / Output Cards
70
Defining the DGKat-IN2-F16 / DGKat-OUT2-F16
The
DGKat-IN2-F16
is a 2-Input HDMI & RS-232 over DGKat Card (F-16):
The
DGKat-OUT2-F16
is a 2-Output HDMI & RS-232 Input over DGKat Card (F-16):
DGKat-IN2-F16 / DGKat-OUT2-F16 Configuration
The
DGKat-IN2-F16
configuration table appears as follows:
DGKat-IN2-F16 Input Card
Parameter Description
Default
HDCP
Turn HDCP on and off.
*0=EN, 1=DIS.
0
The
DGKat-OUT2-F16
configuration table appears as follows:
DGKat-OUT2-F16 Output Card
Parameter
Description
Default
HDMI
Sets the output signal format (Display, HDMI, DVI).
Display
—the output is set automatically based on the EDID of the connected
display.
HDMI
—Force the output to be HDMI.
DVI
—Force the output to be DVI.
Note
: When selecting the DVI option, verify that the input signal originates as
RGB or that you convert it to RGB in the input card's Color Space menu
– if the
EDID dictates RGB color space, copy an EDID that allows RGB only and not
YcBcR. When selecting the DVI option and fast switching is enabled, you must
ensure that the source is DVI compatible.
Display
Deep Color Sets maximum color bit depth (Auto, 8 bit).
Auto
—Set the color depth automatically.
8 bit
—Limit the color depth to 8 bits.
Note
: Deep color on DGKat is not supported at higher resolutions (1080p
@50/60Hz or WUXGA). When setting deep color to on, ensure that the
resolution does not exceed the DGKat maximum data rate of 4.95Gbps
(1.65Gbps per graphic channel).
Auto
Switch
Speed
When switching between different sources the switching time can be reduced by
setting the fast switch level (Ex-fast Switch, Fast Switch or Normal Switch).
Normal
Switch
