Kramer VS-1616DN-EM, User Manual

Page: 150 / 156

Kramer Electronics Ltd.
VS-1616DN-EM
– Protocol 3000
147
Audio Commands
Command Description
AUD-LVL
Set/get audio level in specific amplifier stage
BALANCE
Set/get balance level
BASS
Set/get audio bass level
MIX
Set/get audio mix setting (stereo / mono)
MUTE
Set/get audio mute setting
TREBLE
Set/get audio treble level
VOLUME
Set/get simple audio volume
AUD-LVL
Functions Permission Transparency
Set
AUD-LVL
End User Public
Get
AUD-LVL?
End User Public
Description Syntax
Set Set audio level in specific amplifier stage
# AUD-LVL SPstage,channel,volumeCR
Get Get audio level in specific amplifier stage
# AUD-LVL? SPstage,channelCR
Response
~nn@ AUD-LVL SPstage,channel,volumeCR LF
Parameters
stage
–
0/IN
(input),
1/OUT
(output)
channel
– input or output number:
1-16
(varies according to installed input / output cards, see Port
Numbering on page 12 )
volume
– audio level in Kramer units:
0-70
,
++
(increase current value),
--
(decrease current value)
Response Trigger
Notes
The
VOLUME
command can also be used to set simple output audio volume.
A minus sign precedes negative values.
K-Config Example
Set the audio level of output 8 to 30:
“#AUD - LVL 2,8,30”,0x0D
Increase the audio level of input 3 by 1 unit:
“#AUD - LVL 1,3,++”,0x0D