Kramer VS-1616DN-EM Page 82 User Manual Download

Page: 82 / 156

Kramer Electronics Ltd.

VS-1616DN-EM

– Using the Input / Output Cards

SDIA-IN2-F16 Technical Specifications

The

SDIA-IN2-F16

does not support 3D functionality. The card supports 3Gbps, HD, and SD.

The following table defines the technical specifications.

PORTS:

2 unbalanced analog audio on 3.5mm mini jack
connectors
2 SDI, 75Ω on BNC connectors

TOTAL BANDWIDTH:

3Gbps

MAXIMUM RANGE:

300m (980ft)

– SD

200m (655ft)

– HD 1080p

90m (295ft)

– 3G 1080p

3D PASS THROUGH:

Not supported

POWER CONSUMPTION:

OPERATING TEMPERATURE:

0° to +40°C (32° to 104°F)

STORAGE TEMPERATURE:

–40° to +70°C (–40° to 158°F)

HUMIDITY:

10% to 90%, RHL non-condensing

DIMENSIONS:

19cm x 13cm x 2cm (7.5” x 5.1” x 0.8”) W, D, H

PRODUCT WEIGHT:

0.23 kg (0.51 lbs) approx.

SHIPPING WEIGHT:

0.37 kg (0.82 lbs) approx.

STANDARD COMPLIANCE:

SAFETY REGULATORY COMPLIANCE:

ENVIRONMENTAL REGULATORY
COMPLIANCE:

Complies with appropriate requirements of RoHs and
WEEE

Defining the VGA-IN2-F16 / VGA-OUT2-F16

The

VGA-IN2-F16

is a 2-Input VGA Card (F-16):

The

VGA-OUT2-F16

is a 2-Output VGA Card (F-16):

Summary of Contents for VS-1616DN-EM





























































































































































Search results

Summary of Contents for VS-1616DN-EM

Reviews:

Related manuals for VS-1616DN-EM

Brands by name

Popular brands

Kramer VS-1616DN-EM, User Manual

Search results

Summary of Contents for VS-1616DN-EM

Reviews:

Related manuals for VS-1616DN-EM

Brands by name

Popular brands