Kramer Electronics Ltd.
VS-1616DN-EM
– Using the Input / Output Cards
67
The
HAA-OUT2-F16
configuration table appears as follows:
HAA-OUT2-F16 Output Card
Parameter
Description
Default
Reset
Output
Re-power
—Power cycles the port.
Factory
—Performs a factory reset to default values of the port.
Re-
power
HDMI
Sets the output signal format (Display, HDMI, DVI).
Display
—the output is set automatically based on the EDID of the connected
display.
HDMI
—Force the output to be HDMI.
DVI
—Force the output to be DVI.
Note
: When selecting the DVI option, verify that the input signal originates as
RGB or that you convert it to RGB in the input card's Color Space menu
– if the
EDID dictates RGB color space, copy an EDID that allows RGB only and not
YcBcR. When selecting the DVI option and fast switching is enabled, you must
ensure that the source is DVI compatible.
Display
Deep Color
Sets maximum color bit depth (Auto, 8 bit).
Auto
—Set the color depth automatically.
8 bit
—Limit the color depth to 8 bits.
Auto
Switch
Speed
When switching between different sources the switching time can be reduced by
setting the fast switch level (Ex-fast Switch, Fast Switch or Normal Switch).
Normal
Switch
Audio Mute
MUTE
—Mutes the audio input.
Non-MUTE
—Unmutes the audio input.
Note
: When set to Mute, any change to the audio parameters automatically sets
this to unmute.
Note
: Not applicable when digital audio is selected.
Non-
MUTE
Volume
Sets the audio output volume (0
–70).
Note
: Not applicable when digital audio is selected.
50
Audio
Balance
Sets the audio output channel balance (0
–100).
Note
: Not applicable when digital audio is selected.
50
Audio Bass
Sets the audio output bass level (0
–15).
Note
: Not applicable when digital audio is selected.
7
Audio
Treble
Sets the audio output treble level (0
–15).
Note
: Not applicable when digital audio is selected.
7
Audio
Mono
OFF
—Analog output is stereo.
MIX
—Analog output is mono.
Note
: Not applicable when digital audio is selected.
OFF
