Kramer Electronics Ltd.
VS-1616DN-EM
– Using the Input / Output Cards
73
Defining the F670-IN2-F16 / F670-OUT2-F16
F670 cards are fully compatible with the Kramer
670T/670R
and
671T/671R
HDMI/DVI
transmitters and receivers for non-HDCP content.
The
F670-IN2-F16
is a 2-Input HDMI over OM3 Fiber Card (F-16):
The
F670-OUT2-F16
is a 2-Output HDMI over OM3 Fiber Card (F-16):
F670-IN2-F16 / F670-OUT2-F16 Configuration
The
F670-IN2-F16
configuration table appears as follows:
F670-IN2-F16 Input Card
Parameter
Description
Default
Reset Input Re-power
—Power cycles the port.
Factory
—Performs a factory reset to default values of the port.
Re-power
HDCP
Turn HDCP on and off.
*0=EN, 1=DIS.
0
The
F670-OUT2-F16
configuration table appears as follows:
F670-OUT2-F16 Output Card
Parameter
Description
Default
Reset
Output
Re-power
—Power cycles the port.
Factory
—Performs a factory reset to default values of the port.
Re-
power
HDMI
Sets the output signal format (Display, HDMI, DVI).
Display
—the output is set automatically based on the EDID of the connected
display.
HDMI
—Force the output to be HDMI.
DVI
—Force the output to be DVI.
Note
: When selecting the DVI option, verify that the input signal originates as
RGB or that you convert it to RGB in the input card's Color Space menu
– if the
EDID dictates RGB color space, copy an EDID that allows RGB only and not
YcBcR. When selecting the DVI option and fast switching is enabled, you must
ensure that the source is DVI compatible.
Display
Deep Color Sets maximum color bit depth (Auto, 8 bit).
Auto
—Set the color depth automatically.
8 bit
—Limit the color depth to 8 bits.
Auto
Switch
Speed
When switching between different sources the switching time can be reduced by
setting the fast switch level (Ex-fast Switch, Fast Switch or Normal Switch).
Normal
Switch
