![background image](http://html.mh-extra.com/html/kramer/vs-1616dn-em/vs-1616dn-em_user-manual_2001300136.webp)
Kramer Electronics Ltd.
VS-1616DN-EM
– Protocol 3000
133
HDCP-MOD
Functions
Permission
Transparency
Set
HDCP-MOD
Administrator
Public
Get
HDCP-MOD?
End User
Public
Description
Syntax
Set
Set HDCP mode
#
HDCP-MOD
SP
inp_id,mode
CR
Get
Get HDCP mode
#
HDCP-MOD?
SP
inp_id
CR
Response
Set / Get:
~nn@
HDCP-MOD
SP
inp_id,mode
CR LF
Parameters
inp_id
– input number:
1-16
(varies according to installed input cards, see
mode
–
HDCP mode:
0
(HDCP Off),
1
(HDCP On),
2
(Follow input),
3
(Mirror output
– MAC mode)
Response Trigger
A response is sent to the com port from which the set (before execution) / get command was received
A response is sent to all com ports after command execution if
HDCP-MOD
was set by any other external
control device (device button, device menu or other) or if the HDCP mode changed
Notes
Set HDCP working mode on the device input:
HDCP not supported - HDCP Off
HDCP support changes following detected sink - MIRROR OUTPUT
K-Config Example
Disable HDCP mode on input 3:
“#HDCP
-
MOD 3,0”,0x0D
HDCP-STAT
Functions
Permission
Transparency
Set
-
-
-
Get
HDCP-STAT?
End User
Public
Description
Syntax
Set
-
-
Get
Get HDCP signal status
#
HDCP-STAT?
SP
stage,stage_id
CR
Response
~nn@
HDCP-STAT
SP
stage,stage_id,status
CR LF
Parameters
stage
–
0
(input),
1
(output)
stage_id
– input/output number:
1-16
(varies according to installed input/output cards, see
status
–
signal encryption status:
0
(HDCP Off),
1
(HDCP On),
2
(Follow input),
3
(Mirror output
– MAC
mode)
Response Trigger
Response is sent to the com port from which the Get command was received
Notes
Output stage (
1
)
– get the HDCP signal status of the sink device connected to the specified output
Input stage (
0
)
– get the HDCP signal status of the source device connected to the specified input
K-Config Example
Get the HDCP input signal status of the source device connected to input 9:
“#HDCP
-
STAT? 0,9”,0x0D