Kramer VS-1616DN-EM Page 29 User Manual Download

Page: 29 / 156

Kramer Electronics Ltd.

VS-1616DN-EM

– Using the Configuration Menus

Setup Menu

—

4: store setup XX, Storing the Setup in a Preset

This option stores the current setup in a preset (1 to 60).

To store the current setup in a preset:

1. Press MENU.

The Setup Menu options are displayed.

2. Press 4 (STO) on the numeric keypad (see

Figure 2

The following is displayed:

store => __

3. Using the numeric keys, enter the preset (1 to 60) in which to store the current setup.

The following is displayed:

Wait …..

After a few seconds, if the preset is not empty, the following is displayed:

SETUP NOT EMPTY
CONFIRM

The TAKE button flashes.

4. Press TAKE.

The setup is stored in the selected preset for subsequent recall. The display reverts to
the output/input display.

Setup Menu

—

6: recall setup XX, Recalling a Preset

This option recalls a stored configuration from a preset (1 to 60).

To recall a stored configuration:

1. Press MENU.

The Setup Menu options are displayed.

2. Press 6 (RCL) on the numeric keypad (see

Figure 2

The following is displayed:

recall <= __

3. Using the numeric keys, enter the preset (in this example, 02) to recall.

The following is displayed:

Wait …..

After a few seconds, the following is displayed on the right hand side:

CONFIRM
RECALL <= 02

The TAKE button flashes.

4. Press TAKE.

The preset is recalled. The display reverts to the output/input display.

Summary of Contents for VS-1616DN-EM





























































































































































Search results

Summary of Contents for VS-1616DN-EM

Reviews:

Related manuals for VS-1616DN-EM

Brands by name

Popular brands

Kramer VS-1616DN-EM, User Manual

Search results

Summary of Contents for VS-1616DN-EM

Reviews:

Related manuals for VS-1616DN-EM

Brands by name

Popular brands