Kramer Electronics Ltd.
VS-1616DN-EM
– Operating and Configuring – Embedded Web Pages
37
2. Click the circle that intersects the input and output that you want to switch.
The selected circle turns green, and the video input is switched to the output.
Turning Off Outputs
–
Web Pages
VS-1616DN-EM
enables you to turn off outputs, so that they are not connected to any input.
To turn off an output:
1. Go to the Routing Settings page.
2. Click the circle in the CLOSE row that corresponds to the output that you want to turn
off.
The selected output is turned off.
Copying EDID
–
Web Pages
VS-1616DN-EM
enables you to copy an EDID from any input or output to any input using the
embedded web pages.
To copy an EDID:
1. Go to the EDID Management page.
2. Click an input or output in the
Read From
area.
-OR-
Click
DEFAULT
to use the default EDID.
3. Click all relevant Inputs in the
Copy to
area.
Select the
All
checkbox to copy to all inputs.
4. Click
COPY
.
The selected EDID is copied to all selected inputs.
Configuring Ports
–
Web Pages
VS-1616DN-EM
enables you to configure settings for each input or output on a module card
that is installed into the chassis.
To configure settings for a port:
1. On the Port tab of the Settings page, click the relevant port from the Port List.
The Information panel for the selected port appears.
2. Configure settings as needed.
