Kramer VS-1616DN-EM, User Manual

Page: 145 / 156

Kramer Electronics Ltd.
VS-1616DN-EM
– Protocol 3000
142
VID
Functions Permission Transparency
Set
VID
End User Public
Get
VID?
End User Public
Description Syntax
Set Set video switch state
# VID SP in>out,in>out ,… CR
Get
Get video switch state
# VID? SP out CR
# VID? SP * CR
Response
Set
: ~nn@ VID SP in>out CR LF
~nn@ VID SP in>out CR LF …
Get
: ~nn@ VID SP in>out CR LF
~nn@ VID SP in>1,in>2 ,… CR LF
Parameters
in
– input number:
0
(if output disconnected),
1-16
(varies according to installed input cards, see Port
Numbering on page 12 )
>
– connection character between in and out parameters
out
– output number:
1-16
(varies according to installed output cards, see Port Numbering on page 12 ),
*
(all outputs)
Response Trigger
Notes
When AFV switching mode is active, this command also switches audio and the unit replies with
command ~AV.
Examples
Switch video input 2 to output 4
#V 2>4CR ~01@VID 2>4CRLF
Switch video input 4 to output 2 in
machine 6
#6@VID 4>2CR ~06@VID 4>2CRLF
Switch video input 3 to all outputs
#V 3>*CR ~01@VID 3>*CRLF
Chaining multiple
commands
#AV 1>* | V 3>4,2>2,2>1,0>2 | V
3>9 | A 0>1 | V? *CR
1. Switch audio and video from input 1 to all
outputs
2. Switch video input 3 to output 4,
video input 2 to output 2,
video input 2 to output 1 and
disconnect video output 2
3. Switch video input 3 to output 9 (non-
existent)
4. Disconnect audio output 1
5. Get status of all video links
Command processing begins after entering
CR
A response is sent for each command after
processing
~AV 1>*CRLF
~VID 3>4 CRLF
~VID 2>2 CRLF
~VID 2>1 CRLF
~VID 0>2 CRLF
~VID ERR003 CRLF
~AUD 0>1CRLF
~VID 2>1,0>2,1>3,
3>4CRLF
K-Config Example
Set the video switch state from input 4 to output 2:
“#VID 4>2”,0x0D