Kramer VS-1616DN-EM Page 53 User Manual Download

Page: 53 / 156

Kramer Electronics Ltd.

VS-1616DN-EM

– Using the Input / Output Cards

HDBT7-IN2-F16 / HDBT7-OUT2-F16 Technical Specifications

HDBT cards must be used with twisted pair cables with RJ-45 connections, such as Kramer

BC-UNIKAT

shielded twisted pair (U/FTP) cables.

The following table defines the technical specifications.

PORTS:

2 HDBaseT TP on RJ45 connectors
2 RS-232 Serial ports on a 10-pin terminal block
2 IR ports on 3.5mm jacks

BANDWIDTH PER CHANNEL:

Video: 3.4Gbps
Serial Data: 115200

TOTAL BANDWIDTH:

Video: 10.2Gbps
Serial Data: 115200

MAXIMUM RANGE:

40m (130ft)

– 4K @60Hz 4:2:0 or 4K @30Hz 4:4:4

70m (230ft)

– 1080p 12 bit (deep color)

3D PASS THROUGH:

Supported

POWER CONSUMPTION:

Input card: 10W
Output card: 8W

OPERATING TEMPERATURE:

0° to +40°C (32° to 104°F)

STORAGE TEMPERATURE:

–40° to +70°C (–40° to 158°F)

HUMIDITY:

10% to 90%, RHL non-condensing

DIMENSIONS:

19cm x 13cm x 2cm (7.5” x 5.1” x 0.8”) W, D, H

PRODUCT WEIGHT:

0.16 kg (0.35 lbs) approx.

SHIPPING WEIGHT:

0.35 kg (0.77 lbs) approx.

STANDARD COMPLIANCE:

HDBaseT, HDTV compatible

SAFETY REGULATORY COMPLIANCE:

ENVIRONMENTAL REGULATORY
COMPLIANCE:

Complies with appropriate requirements of RoHs and
WEEE

INCLUDED ACCESSORIES:

Screwdriver

Summary of Contents for VS-1616DN-EM





























































































































































Search results

Summary of Contents for VS-1616DN-EM

Reviews:

Related manuals for VS-1616DN-EM

Brands by name

Popular brands

Kramer VS-1616DN-EM, User Manual

Search results

Summary of Contents for VS-1616DN-EM

Reviews:

Related manuals for VS-1616DN-EM

Brands by name

Popular brands