![background image](http://html.mh-extra.com/html/kramer/vs-1616dn-em/vs-1616dn-em_user-manual_2001300021.webp)
Kramer Electronics Ltd.
VS-1616DN-EM
– Operating – Front Panel Buttons
18
Viewing the Display
shows the output-input matrix on the LCD display. The LCD display can show only
13 out of the 16 available matrix combinations at once. To view any of the matrix
combinations use the ◄ or the ► buttons on the front panel to shift the sliding window to the
right or left.
This sliding window functionality is enabled when:
•
The switcher is in between operations (waiting for its next operation while all previous
operations are complete or cancelled)
•
Recalling a setup using the ◄ or ► buttons
When entering an output/input combination, the contents of the LCD display automatically
shift to indicate the current status of the selected output.
Using the Selector Buttons
For numbers between 1 and 9, the
VS-1616DN-EM
can handle two digit numbers as well as
single digit numbers. When entering a single digit number (for example 5), you can either
press 0 followed by 5, or 5 followed by ENTER.
Pressing 00 (or 0, ENTER) is only relevant for an input and is used to disconnect the currently
entered output number from the input.
For example, the following display indicates that outputs 8 and 12 are disconnected from any
input (note that the corresponding inputs in the second line are blank):
06 07 08 09 10 11 12 13
12 08
10 14 13
06
The ESC button is used to cancel an operation without affecting the current status. For
example, if you enter an incorrect number by mistake, press the ESC button to cancel the
operation.
At any stage, if no button is pressed within approximately 15 seconds, the automatic timeout
causes the
VS-1616DN-EM
to exit the operation and revert to the output/input display.
Confirming Actions
You can choose to work in the At Once (default, for all actions except storing/recalling) or the
Confirm mode.
In the At Once mode:
•
The TAKE button does not light.
•
Pressing an
OUT-IN combination implements the switch without further user
confirmation.