Kramer VS-1616DN-EM, User Manual

Page: 20 / 156

Kramer Electronics Ltd.
VS-1616DN-EM
– Operating – Front Panel Buttons
17
Operating – Front Panel Buttons
This section describes:
•
The startup display (see Startup Display on page 17 ).
•
Using the selector buttons (see Using the Selector Buttons on page 18 ).
•
Confirming actions (see Confirming Actions on page 18 ).
•
Switching options (see Switching Actions on page 19 ).
•
Locking the front panel (see Locking the Front Panel Buttons on page 22 ).
You can also operate the device using the embedded web pages (see Operating and
Configuring
– Embedded Web Pages
on page 34 ).
Startup Display
After switching on the power, the LCD display shows the following screens in sequence (text
in the LCD Display may vary according to machine settings).
Figure 11: Default Startup Status Display Sequence
The VS-1616DN-EM does not have separate output and input buttons. Instead, the front
panel includes a numeric keypad within the Selector Buttons area (see Defining the
VS-1616DN-EM 2x2 to 16x16 Modular Multi-Format Managed Digital Matrix
Switcher
on page 6 ). This numeric keypad lets you enter both the output and input numbers
as well as various numeric configuration values (see Using the Selector Buttons on page 18 ).
When the unit is powered-on, the last matrix setup that was used is loaded. Use either the
setup recall (records a stored configuration from a preset, see
Setup Menu
—6: recall
setup on page 26 ) or default setup recall (for quick retrieval of a commonly used
programmable default setup, see Recalling the Default Setup on page 21 ) functions to
retrieve other setups.