Kramer VS-1616DN-EM Page 95 User Manual Download

Page: 95 / 156

Kramer Electronics Ltd.

VS-1616DN-EM

– Using the Test Module to Troubleshoot Video and Audio Problems

4. Verify that the audio output is as expected.

Testing the Output Signal Path to the Audio Output

Signal path: g to a; a to b; b to an audio acceptor (for example, powered speakers).

To test the output signal path to the audio output:

1. Connect an analog audio source to Input 17.

2. Configure Input 17 to Output 1 (see

Switching Actions

on page

3. Connect Output 1 to the audio acceptor.

4. Verify that the audio output is as expected.

Testing the Input and Output Signal Path to the Audio Output

Signal path: g to c; c to e; e to f; f to b; b to an audio acceptor (for example, powered
speakers).

To test the input and output signal path to the audio output:

1. Connect an analog audio source to Input 17.

2. Configure Input 17 to Output 17 (see

Switching Actions

on page

3. Connect Output 17 to Input 1.

4. Configure Input 1 to Output 1.

5. Connect Output 1 to the audio acceptor.

6. Verify that the audio output is as expected.

Summary of Contents for VS-1616DN-EM





























































































































































Search results

Summary of Contents for VS-1616DN-EM

Reviews:

Related manuals for VS-1616DN-EM

Brands by name

Popular brands

Kramer VS-1616DN-EM, User Manual

Search results

Summary of Contents for VS-1616DN-EM

Reviews:

Related manuals for VS-1616DN-EM

Brands by name

Popular brands